16ft Ku/Ka band dish antenna

Prime-focus Ku/Ka band Prime focus dish antenna

Specification:

DTA-2132 High-end Card

DTA-2132 High-end satellite receiver for PCIe

Professional-grade satellite receiver card with high-quality RF measurements.
Ideal for satellite monitoring, modulator testing, and high-speed data distribution.
The card comes with full decoding and analysis of DVB Carrier ID (DVB-CID).

Features

FPGA-based DVB-S2/S2X demodulator (no CPU cycles consumed) with calibrated channel-power and MER measurement.
Supports VCM, ACM, MIS (multiple input streams), GS (generic stream) with access to baseband frames (BBFRAMEs) in L.3 format.
Hardware demodulator can be bypassed to obtain I/Q samples for recording or SDR.

Applications

Creating comprehensive satellite-network monitoring solutions for DVB-S2 and DVB-S2X.
Decoding and analysis of single or multiple DVB-CID signals, even when the satellite carrier interferes with other carriers.
Validation of DVB-S2/S2X/CID modulators.
High-speed satellite data distribution.

Block Diagram

The main path of the DTA-2132 consists of a wide-band L-band tuner, 12-bit I/Q analog-to-digital converter, DVB-S2/S2X demodulator and decoder, L.3 packetizer, FIFO, DMA controller, and PCIe interface. Constellation points are sampled after the demodulator, while LDPC error-rate and other statistics are gathered after the decoder.

A secondary I/Q path is used for multiple purposes: estimating the spectral characteristics of the input signal, DVB-CID demodulation, and sending I/Q samples to a user-space application for SDR, recording, or other purposes. A third path low-pass filters the I- and Q samples and estimates the signal power, corrected by calibration tables.

The DTA-2132 also contains an 18V/600mA LNB power inserter with over-current protection, as well as a DiSEqC-2.0 22-kHz LNB-control signal inserter. Finally, a temperature monitoring unit controls fan speed to keep the board cool.

Key Characteristics

RF frequency L band
950 to 2150MHz
Constellation Up to 256APSK/APSK-L
Symbol rate Up to 72MBd
Data rate Up to 425Mbps
Measurements RF level: -80 to -20dBm
MER: 3 to 35dB
Constellation diagram

Inputs and Outputs

RF in 75-Ω F female
PCI Express PCIe gen2 x4
Modulation Standards

Included with base product DVB-S2
DVB-S2X
DVB-CID
I/Q sample capturing

PC Support

OS
Windows 2k8/12/16
7, 8, 10
Linux ≥2.6.18, 3.x, 4.x
CPU Core i7-4xxx or above
Or AMD equivalent

Software

StreamXpert Our industry-standard transport-stream analyzer
DekTec SDKs Create your own application

Download PDF
DTA-2132 Leaflet
Dektec Products_PCIe_DTA-2132

15ft Ku/Ka band Dish antenna

15ft. Ku/Ka-band Prime focus dish antenna

Specification:

C-Band Gardiner 3.4 GHz

Gardiner C-Band Lnb

17K Gardiner c-Band Lnb

Gardiner 17K C-Band with Single-Polarity-High-Quality-LNB. It will receive an uninterrupted signal from frequency 3.4 GHz to 4.2 GHz. Most recommended product from the group of special 3.4 GHz to 4.2 GHz.

Specification:
Input Frequency: 3.4 to 4.2 GHz
L.O.-Frequency: 5150MHz (±500 MHz)
Output Frequency: 950MHz to 1750MHz
L.O.-Leakage Input Port: 45dBm
L.O. Stability: ±1.5MHz (-40 centigrade to +70 centigrade)
Noise Figure:  17°K typConversion
Gain:  65dB typ
Gain Flatness: ±1 dBm (max)

10ft. C-Band Dish antenna

Specification:

7ft Ku/Ka-Band Dish Antenna

2.1 meter Ku/Ka-Band Prime focus Dish Antenna

Specification

Norsat 8520R DRO C-band Lnb

Norsat 8520R C-band Lnb

Specification:

Norsat 8520R C-band DRO LNB

Model: • Norsat 8520R
Input Frequency: • 3.4 – 4.2 GHz
Local Frequency: • 5.15 GHz
Local Stability: • ±500 kHz
Noise Temperature: • 20K
Output Frequency: • 950 – 1750 MHz
Phase Noise: • -65 dBc/Hz @ 1 kHz
• -80 dBc/Hz @ 10 kHz
• -95 dBc/Hz @ 100 kHz
Input VSWR: • 2.0:1
Output VSWR: • 2.2:1
Gain: • 64 dB
Output P1dB • 8 dBm
Power • 12 – 24V DC supplied through center conductor of IF cable
Current Drain • 130 mA
Input Waveguide • CPR 229G
Temperature Range • -40°C to +60°C
Dimensions • 7.1 x 4.0 x 2.8 Inches
Weight • 15 oz

Made in Korea

Download specification sheet
Norsat 8000r_lnb

6ft Ku/Ka-Band Dish Antenna

1.8 meter Ku/Ka-Band Prime focus Dish Antenna

Specification

Ti 5G-Filter-Lnb

Gardiner C-Band 5G Filter LNB

Description
The Gardiner C-Band TI and 5G Filter LNBF is a high-quality low-loss broadband filter that is a great way to stop any interference and protect your wireless connection. This filter can be used with a wireless router or a cordless phone. It has a high-density polyethylene coating that is both water-resistant and impact-resistant, making it durable and reliable.

Technical Specifications:
Input : 3.7-4.2 GHz
LO Freq. : 5.150 GHz
Stability : +/-250KHz
Gain : 62dB (Type)
Temp : 15K
DC Input : +13V to +24V

C-band Dual Port Feed-Horn

C-band Dual-Port Feed-Horn

C Band Dual Polarity Feedhorn
Our C Band Dual Polarity Feedhorn can be used for dual or double polarity reception with a dual polarity C Band LNB on prime focus C-Band dish antenna. The feedhorn has a standard C Band flange that will bolt to any standard C Band LNB. The feedhorn can be fitted to dishes that use either tri or quad feed arms for support of the LNB and feedhorn.

Description

The Feed is a dual-polarity C-Band feedhorn for the reception of linear polarized signals in the 3.7 to 4.2 GHz bandwidth. Superior quality, excellent illumination patterns, and a compact design make the Super Feed the ideal choice in feedhorns for dual polarity systems.

Feed features chip-resistant

powder paint and cast aluminum construction for

added protection against the environment. Built in the

Chaparral tradition of quality, the Super Feed is the

an ideal choice for reliable performance.

Specifications

C-Band Frequency Range: 3.7-4.2 GHz

f/D Range: 33 to 45

Cross-Pol. Isolation: 25 dB minimum

Output Ports: WR 229 compatible

Temperature Range: -40° C to 60° C